CO2 Laser alamar inji
CO2 Laser alama inji ne Laser galvanometer alama inji cewa yana amfani da CO2 gas a matsayin aiki medium.CO2 Laser source yana amfani da CO2 gas a matsayin matsakaici, CO2 da sauran karin gas ana caje a cikin fitarwa tube don ƙara high ƙarfin lantarki zuwa lantarki, da haske fitarwa. Ana samar da shi a cikin bututun fitarwa, ta yadda iskar gas ke fitar da Laser mai tsawon 10.64um, kuma makamashin Laser yana karuwa da girgiza.Bayan duban madubi da madubin F-Theta suna mai da hankali, a ƙarƙashin ikon kwamfuta da katin kula da alamar laser, hoton, rubutu, lambobi da layukan za a iya yiwa alama akan kayan aikin bisa ga buƙatun mai amfani.
CO2 Laser sa na'ura ana amfani da yafi a wasu aikace-aikace inda mafi kyau daidaito da kuma mafi girma daidaici ake bukata.Amfani da abinci, magani, ruwan inabi, kayan lantarki, haɗaɗɗun da'irori (IC), na'urorin lantarki, sadarwar wayar hannu, kayan gini, bututun PVC da sauran masana'antu, babban fa'idar CO2 Laser alamar na'ura da firintar tawada shine cewa babu kayan amfani da kuma sauran masana'antu. m.
| Sunan Abu | Ma'aunin Fasaha | |
| Samfura | EC-30W | Saukewa: EC-60W |
| Ƙarfin Laser | 30W | 60W |
| Laser tsayin daka | 10.64 ku | |
| Nau'in Laser | China Davi / America Synrad / karfe RF Laser tushen | |
| Mafi ƙarancin faɗin layi | 0.02mm | |
| Maimaita mita | 0-25 kHz | |
| Alamar layi cikin sauri | ≤ 5000mm/s | |
| Zurfin alamar alama | 0.01-0.5mm | |
| Wurin yin alama | 110×110mm - 300×300mm | |
| Yana goyan bayan tsarin zane | DXF, PLT, BMP, AI da dai sauransu | |
| Wutar lantarki mai aiki | 110V-240V/50-60Hz/15A | |
| Sanyi | Sanyaya iska | |
| Girman shiryarwa | cm (L*W*H) | |
| Cikakken nauyi | 88 kg | |
| Kunshin | Daidaitaccen fitarwa na katako | |
Iyakar aikace-aikace: Faɗin aikace-aikace: Ana iya haɗawa cikin sauƙi cikin layin samarwa ko aiki da kansa;Ya dace da yin alama, sassaƙa, da yanke akan yawancin kayan da ba ƙarfe ba;Tsarin aiki mai sauƙi da dacewa: tsarin aiki mai amfani mai amfani, kwanciyar hankali na aiki na kayan aiki;Software na sarrafawa da aka keɓe zai iya dacewa tare da kayan aikin software da yawa kamar AutoCAD, CorelDRAW, Photoshop, da sauransu;Tsari ta atomatik da gyare-gyaren alamomin rubutu, hotuna masu hoto, lambobin barkwanci, lambobi masu girma biyu, da jerin lambobi;Yana goyan bayan nau'ikan fayil da yawa kamar PLT, PCX, DXF, BMP, JPG, kuma yana iya amfani da dakunan karatu na TTF kai tsaye;Fitaccen aikin farashi na samfur: ta amfani da lasers RF, kyakkyawan aikin katako, tsawon rayuwar sabis, aikin barga, kyauta mai kulawa;Sabis mai dacewa da sauri, babu damuwa bayan amfani;Zane mai sauƙi da mai amfani, ceton tsadar horo;Gabaɗaya aikin kayan aikin yana da ƙarfi kuma yana da ikon yin aiki ci gaba har tsawon sa'o'i 24.
The CO2 Laser alama inji iya alama daban-daban wadanda ba karfe kayayyakin da wasu karfe kayayyakin, kamar bamboo kayayyakin, itace, acrylic, fata, gilashin, architecture tukwane, roba, da sauransu.An yi amfani da shi sosai a cikin marufi na magunguna, kayan abinci, marufi na abin sha, robobi, yadi, fata, itace, kayan aikin hannu, kayan lantarki, sadarwa, agogo, tabarau, bugu da sauran masana'antu.Ya dace da yin alama, sassaƙa, huɗawa, da yankan kayayyaki da kayayyaki marasa ƙarfe iri-iri.Ana iya amfani da shi don yin alama, sassaƙa, huɗawa, da yankan haruffa daban-daban, alamomi, zane-zane, hotuna, lambar bariki, lambobin serial, da sauransu.
Na'ura ta CO2 Laser tana ɗaukar laser CO2 da aka shigo da ita, sanye take da galvanometer mai saurin sauri na Jamus da tsarin fadada katako da mai da hankali, tare da daidaiton alamar alama da saurin sauri;Za'a iya daidaita tsayin Laser ZJ-2626A sama da ƙasa, yana mai sauƙin amfani.Yana iya maye gurbin ruwan tabarau na nau'ikan alama daban-daban;Dogon sa'o'in aiki na ci gaba, bayyanannun alamomi masu kyau, ayyukan software masu ƙarfi, alamar lamba, alamar jirgin;Kafaffen ƙirar Laser alamar ƙira, aiki mai sauƙi, kammala sama da ƙasa tsarin iska, kariyar muhalli da aminci a wurin aiki
Masana'antu masu dacewa
Pshinecnc Fiber Laser alama jerin inji ne yadu amfani a karfe da kuma wadanda ba karfe filayen, kamar atomatik sassa masana'antu,
kayan aikin likita, kayan lantarki, masana'antar IT, masana'antar hardware, na'urori masu mahimmanci, kayan ado, sana'a,
na'urori masu ƙarancin ƙarfi, masana'antar tattara kaya, da sauransu.
Abubuwan da ake buƙata
Pshinecnc Fiber Laser marking machine ƙwararre ce ga duka ƙarfe da alamar kayan da ba na ƙarfe ba.
Irin su bakin karfe, carbon karfe, aluminum, jan karfe, chrome, anodized aluminum, siliki wafer, da dai sauransu.
haka kuma da yawa daga kayan da ba karfe ba, kamar yumbu, roba, robobi, fata, kwali, da sauransu.
1. Lokacin da ya dace don sabis na abokin ciniki yana cikin sa'o'i 24;
2. Wannan na'ura yana da garanti na shekara guda, garantin laser ( garantin bututun ƙarfe na shekara guda, garantin bututun gilashi na watanni takwas), da kiyayewa na rayuwa;
3. Zai iya zama gyara gida-gida da shigarwa, gami da coci har sai, amma za a caje;
4. Ci gaba da rayuwa kyauta da haɓaka software na al'ada na tsarin;
5. Lalacewar wucin gadi, bala'o'i, abubuwan da suka shafi majeure, da gyare-gyare mara izini ba a rufe su da garanti;
6. Duk kayan aikin mu suna da ƙididdiga masu dacewa, kuma a lokacin lokacin kulawa, za mu samar da sassa masu sauyawa don tabbatar da aikin al'ada na samar da ku;
